Product
|
Summary Resistance to mechanical strength, heat resistance, abrasion resistance, chemical resistance, machinability, dimensional stability, good electrical properties. PEEK, PPS, TORLON, PI and other high-performance engineering plastics, has been widely used in the semiconductor and photovoltaic industry. PEEK,(Polyetheretherketone) PEEK material is very high continuous use temperature (approximately + 260 ℃), also has a very high rigidity and hardness, as well as unique high Tensile strength and fatigue strength. In addition the heat deformation (but 1.8Mpa heat distortion temperature of about 141 ℃, when you need to pay attention to the use of high temperature and high load) and chemical stability and taste. When the temperature reached 260 ℃ before the material has excellent dielectric properties, and resistance to energy ray irradiation (UV irradiation only slight yellowing of the material). According to the UL94 standard PEEK may self-extinguish.
PPS,(Polyphenylene Sulfide) PPS is a reinforced, internally lubricated semi-crystalline polymer, it has good chemical and mechanical properties, high dimensional stability at high temperatures, including wear resistance, high load capacity and dimensional stability, which reduces the standard developed thermoplastic performance of the price difference: (PBI, PI, PAI, PEEK ... as) between: plastic materials (such as PA, POM, PET ...) and high-end engineering plastic materials.
R-1000 (PPS composites) 1.Water absorption, low coefficient of linear expansion, high dimensional stability. 2.Ultrahigh rigidity. 3.You can make very fine processing.
Torlon ,(Polyamide-imide) TORLON PAI is the best of all engineering plastics in a toughness and impact strength. Because of its inherent high temperature, dimensional stability and good machinability, TORLON PAI precision parts commonly used in the production of high-tech equipment. Furthermore, due to its good electrical insulating properties, so that in the field of electrical components are widely used.
PI 1.High operating temperature (continuous working temperature: 240 ℃, the maximum working temperature: 450 ℃). 2.To maintain a high mechanical strength, hardness, creep resistance. 3.The sliding surface of a good and high wear resistance. TI-3000 規格尺寸
UPIMOL SA201 Size
UPIMOL SA101 Size
Antistatic series 1.Water absorption, low coefficient of linear expansion, high dimensional stability. 2.Ultrahigh rigidity. 3.You can make very fine processing. TI-330 AE3 Size
TI-510 AE1 Size
TI-520 AE2 Size
TI-530 AE3 Size
PEEK 430-AE3 Size
PPS 220-AE2 Size
PPS 230-AE3 Size
UNILATE 1.UNILATE PET fusion of short glass fibers, mica extrusion made of a composite material. 2.With excellent insulation properties, low water absorption, chemical resistance, secondary processability, insulating property, heat resistance and rigidity.
TPS-PBI 1.High operating temperature (continuous working temperature: 310 ℃, the maximum working temperature: 500 ℃). 2.Maintain a high mechanical strength, hardness, creep resistance. 3.In the following 250 ℃ have a very low coefficient of thermal expansion. 4.Outstanding wear characteristics. 5.Low flammability. 6.Ion has a high level of purity. 7.High radiation resistance.
ULTEM(PEI) 1.Continuous operating temperature (PPSU-190 ℃, PEI-170 ℃, PSU-150 ℃). 2.At high temperatures still retain a high mechanical strength, high hardness, high creep resistance. 3.Outstanding anti-precipitation of (suitable for use in sterilization by steam sterilization chamber). 4.Even at low temperatures, but also has a high hardness. 5.Good stability. 6.Easy to breed bacteria, commonly used in the food processing industry. 7.Electrical insulation. 8.High radiation resistance.
PES 1.Rao song load temperature 207 ℃, continuous use temperature 180 ℃. 2.Glass transition point 225 ℃ 3.The amount of smoke emitted during combustion is very small. 4.Linear expansion coefficient, high dimensional stability. 5.US FDA food hygiene practices, can be used for food production equipment.
POM 1.High chemical resistance, high strength, high hardness. 2.Good resistance to deformation size. 3.Even at low temperatures also have good impact resistance. 4.Wear, high surface slidability. 5.Good mechanical efficiency. 6.Easy to breed bacteria, commonly used in the food processing industry. 7.Continuous working temperature above 90 ℃.
PBT 1.It has excellent heat resistance, weather resistance, electrical characteristics. 2.Widespread use in the electronics, machinery, automobile and other parts.
PC 1.High chemical resistance. 2.Even at low temperatures, but also has a very excellent impact strength. 3.When the temperature is higher, still retain high hardness. 4.High transparency. 5.Easy to breed bacteria, commonly used in the food processing industry. 6.Continuous operating temperature above 115 ℃.
|