Summary

Resistance to mechanical strength, heat resistance, abrasion resistance, chemical resistance, machinability, dimensional stability, good electrical properties. PEEK, PPS, TORLON, PI and other high-performance engineering plastics, has been widely used in the semiconductor and photovoltaic industry.

PEEK,(Polyetheretherketone)

PEEK material is very high continuous use temperature (approximately + 260 ℃), also has a very high rigidity and hardness, as well as unique high Tensile strength and fatigue strength. In addition the heat deformation (but 1.8Mpa heat distortion temperature of about 141 ℃, when you need to pay attention to the use of high temperature and high load) and chemical stability and taste. When the temperature reached 260 ℃ before the material has excellent dielectric properties, and resistance to energy ray irradiation (UV irradiation only slight yellowing of the material). According to the UL94 standard PEEK may self-extinguish.

Stick ROD	O.D(mm)	Long(mm)
	Φ6 ~ 150	1000

PPS,(Polyphenylene Sulfide)

PPS is a reinforced, internally lubricated semi-crystalline polymer, it has good chemical and mechanical properties, high dimensional stability at high temperatures, including wear resistance, high load capacity and dimensional stability, which reduces the standard developed thermoplastic performance of the price difference: (PBI, PI, PAI, PEEK ... as) between: plastic materials (such as PA, POM, PET ...) and high-end engineering plastic materials.

Stick ROD	O.D(mm)	Long(mm)
	Φ20 ~ 150	1000

Torlon ,(Polyamide-imide)

TORLON PAI is the best of all engineering plastics in a toughness and impact strength. Because of its inherent high temperature, dimensional stability and good machinability, TORLON PAI precision parts commonly used in the production of high-tech equipment. Furthermore, due to its good electrical insulating properties, so that in the field of electrical components are widely used.

Stick ROD	O.D(mm)	Long(mm)
	Φ5 ~ 120	300/ 1200

PI

1.High operating temperature (continuous working temperature: 240 ℃, the maximum working temperature: 450 ℃).

2.To maintain a high mechanical strength, hardness, creep resistance.

3.The sliding surface of a good and high wear resistance.

TI-3000 Size

Stick ROD	O.D(mm)	Long(mm)
	Φ5 ~ 80	300

UPIMOL SA201 Size

Stick ROD	O.D(mm)	Long(mm)
	Φ5 ~ 35	120/ 210

UPIMOL SA101 Size

Stick ROD	O.D(mm)	Long(mm)
	Φ5 ~ 35	150

Antistatic series

1.Water absorption, low coefficient of linear expansion, high dimensional stability.

2.Ultrahigh rigidity.

3.You can make very fine processing.

TI-330 AE3 Size

Stick ROD	O.D(mm)	Long(mm)
	Φ10 ~ 20	300

POM

1.High chemical resistance, high strength, high hardness.

2.Good resistance to deformation size.

3.Even at low temperatures also have good impact resistance.

4.Wear, high surface slidability.

5.Good mechanical efficiency.

6.Easy to breed bacteria, commonly used in the food processing industry.

7.Continuous working temperature above 90 ℃.

Stick ROD	O.D(mm)	Long(mm)
	Φ4 ~ 200	1000 / 2000

PBT

1.It has excellent heat resistance, weather resistance, electrical characteristics.

2.Widespread use in the electronics, machinery, automobile and other parts.

Stick ROD	O.D(mm)	Long(mm)
	Φ20 ~ 100	1000